How Do You Reset the Lion Energy UT1300 Battery?

The Lion Energy Lithium UT1300 Battery is one of the best options to use on the road. Manufacturers warn users not to disassemble, reassemble, or repair it, but what do they say about resetting the battery? 

To reset a Lion Energy Lithium UT1300 battery, press and hold the power button for about 3 seconds (which also functions as a reset button). The power button also allows you to check on your battery’s remaining charge before and after use.   

In this article, I’ll explain everything you need to know about resetting a Lion Energy Lithium UT1300 Battery. Let’s dive right in!  

Is It Safe To Reset the Lion Energy UT1300 Battery?

It is safe to reset the Lion Energy Lithium UT1300 battery. The battery is ideal for road trips, and is made from the best and safest grade of lithium iron phosphate. In addition, according to the instructions provided by the manufacturer, there are no safety hazards or warnings associated with resetting the battery. 

We own two of the Lion Energy UT 1300 batteries and have had a positive experience for several years. If you are in the market to purchase one, use this link as well as coupon code savvycampers for an exclusive discount.

The Lion Energy Lithium UT1300 employs the most state-of-the-art battery technology and is a maintenance-free battery, holding its original charge for up to 2 years. During this period, there’s no need for fluids or trickle charging.

No gases or toxic fumes will escape during resetting. However, resetting or charging the battery while in operation isn’t advisable. 

How To Reset a Lion Energy Lithium UT1300 Battery

The Lion Energy Lithium UT1300 battery manufacturers have made it easy to reset by installing a power button, which also functions as a reset button. 

There are three main reasons you might want to reset your Lion Energy Lithium UT1300 battery. These include the following:

• A non-responsive battery
• A short circuited battery
• General battery reset 

I’ll discuss these reasons in more detail below: 

Non-Responsive Batteries

For a non-responsive battery, press the power button on the top of the battery for approximately 3 seconds. Monitor it to ensure that all five of the LEDs light up. They should all light up simultaneously, indicating that the reset was successful. 

Short-Circuited Batteries

If you think your battery has a short circuit, it’s a good idea to determine the cause. Here’s what you need to do: 

1. Find the root cause of the short circuit and disconnect it from the battery. 
2. Press the button on top of the battery and release.
3. Press the button again after 2 seconds have passed. 
4. Hold the button for up to 5 seconds, then release.

The LEDs should light up, indicating that the reset was successful.

General Reset

The power button on the top of the battery, when pressed, will display the LED lights. The lights indicate the battery life remaining, depending on the illuminated light or lights. There are 5 LED lights, each representing a percentage of battery life, as shown using the table below:

Battery Life	LED 1	LED 2	LED 3	LED 4	LED 5
0 Percent	Flashing	OFF	OFF	OFF	OFF
20 Percent	ON	OFF	OFF	OFF	OFF
40 Percent	ON	ON	OFF	OFF	OFF
60 Percent	ON	ON	ON	OFF	OFF
80 Percent	ON	ON	ON	ON	OFF
100 Percent	ON	ON	ON	ON	ON

To initiate a general reset, follow the below instructions:

1. Press the power button. 
2. Watch for LED lights to illuminate. 
3. If any of the 5 LEDs light up, press the power button again.
4. Hold the power button until the LED goes off.

A successful reset occurs when the LED goes off. 

Conclusion

Resetting a Lion Energy Lithium UT1300 battery is simple because the manufacturers have outlined step-by-step instructions depending on the reason for resetting the battery. Follow the instructions, and the battery should return to normal in minutes. 

Besides being simple to reset, the Lion Energy Lithium UT1300 battery is considered the best for road trips. 

Always keep an eye on the LED lights, as they’re the pulse of the battery, letting you know when it’s about to die.